• HiKOKI 12V無刷鎚鑽 DH12DD 雙電4.0AH 12V 套裝（限時優惠） HiKOKI
  • HiKOKI 12V無刷鎚鑽 DH12DD 雙電4.0AH 12V 套裝（限時優惠） HiKOKI
  • HiKOKI 12V無刷鎚鑽 DH12DD 4.0AH+2.5AH 12V 套裝（限時優惠） HiKOKI
  • HiKOKI 12V無刷鎚鑽 DH12DD 雙電4.0AH 12V 套裝（限時優惠） HiKOKI
  • HiKOKI 12V無刷鎚鑽 DH12DD 雙電4.0AH 12V 套裝（限時優惠） HiKOKI
1 5

HiKOKI 12V Brushless Hammer Drill DH12DD

HiKOKI 12V Brushless Hammer Drill DH12DD

HK$850.00
HK$1,580.00 HK$850.00
Sale Sold out
Taxes included. Shipping calculated at checkout.
style

HiKOKI 12V Brushless Hammer Drill DH12DD


Pictures of DH12DD

ability cement 18mm
ironwork 13mm
carpentry 18mm
Number of revolutions without load
(When the temperature is 20℃ and fully charged) 		normal mode 0~1,080/minute (reply/minute)
low mode 0-800/minute (return/minute)
Number of hits without load
(When the temperature is 20℃ and fully charged) 		normal mode 0-5,500/min (times/minute)
low mode 0-4,100/min (times/minute)
Body size (length x height x width) 246 x 202 x 74mm (battery installed)
Weight (battery installed) 2.1kg (including side section)
1.9kg (clear side cross-section)
battery Model name BSL1240M
Voltage capacity 10.8V-4.0Ah
Charging time about 60 minutes
charger Model name UC12SL
Standard accessories Battery (BSL1240M*2), charger (UC12SL), depth gauge, side handle, battery cover

Note: The manufacturer reserves the right to change parts and accessories specifications without notice.


The best balance of compactness and titles

  • The compact body has the center of gravity close to your hand, making it easy to hold and work.

    ※ The weight shown in the picture is with BSL36A18 lithium battery, without side handles

    Weight 1.9kg

Top * speed

Commonly used small diameter sizes quickly.

  • October 2020. Among Japanese domestic power tool manufacturers (according to our research) (14-18mm grade/2 mode/12V rechargeable hammer drill)

low tide

  • Anti-shock rubber absorbs the impact transmitted to the handle and stops it.

    Image of shockproof rubber

    The picture shows DH18DPA

High luminosity and brightness equipped with LED lights

  • Easily see the target location and work smoothly.

    LED image light

Switch according to work content Equipped with 2-stage switching

  • Drilling holes in brittle materials becomes easy by pressing the switch and reducing the number of revolutions and contacts.

    Illustration of transfer switch and front end

Supports stable population and improves efficiency of continuous work Equipped with automatic stop function

  • Equipped with "auto stop function", it is very convenient for continuous queue time. Store the queue time and automatically stop the motor at the stored time.

    For example, if it takes 10 minutes from power on to power off, that 10 minutes will be stored and the next drill will automatically stop within 10 minutes.
please note
It will record time reductions but does not guarantee labor shortages. Labor shortages may not be constant due to differences and changes in posture at work, pressure on machines, and work materials. To reduce differences in labor shortages, use depth rules together.

Reactive Load Load (RFC) with Reaction Force Control

  • If the drill bit suddenly encounters excessive load, the sliding brake will act.
    Alternatively, a controller built into the tool body stops the motor, thereby reducing the possibility of the tool body becoming stationary.

    RFC explanation diagram

    Illustration for DH18DPA

    please note
    Depending on operating conditions, it may not operate or perform at its full performance. When working, use caution when installing and securing materials and quickly grasping the body of the tool.

12V sliding battery


  • 14.4V cordless impact wrench: WR14DSHL

    4.0Ah/BSL1240M

Compact structure and large capacity (BSL1240M)

  • Although the battery itself is compact, it has a high capacity of 4.0Ah.

    10.8V Slide Mount Image

You can see the remaining battery power at a glance. (BSL1240M)

  • You can refer to the manual content and use the battery level guide to check the battery level, battery temperature, and whether the battery is faulty.

    10.8V Slide Mount Image
Light on state
light up
light up
light up
light up
flashing
Battery More than 75% 50-75% 25-50% less than 25% 0%
Light on state
flashing
flashing
battery status Output stopped due to high temperature* 1 Output stopped due to fault*2
  1. Remove the battery from the tool body and allow it to cool sufficiently.
  2. The battery may be faulty, so please contact the store where you purchased the product.

Fast charging time

  • Achieve perfect charging times by using the complete best fast charger UC12SL and circuit board design

    BSL1240M: about 60 minutes
    (Charging time may be longer, depending on ambient temperature and battery condition)

  • February 2020. Japanese domestic power tool manufacturer (based on our research) (12V sliding lithium-ion battery)

Amount of work required for one full charge (estimated) *

Work content Capacity Amount of work required for one full charge (estimated) *
residential concrete Depth 30mm,
Drill diameter 3.5mm 		4.0 Ah about 130
Depth 30mm,
Drill diameter 10.5mm 		4.0 Ah about 55
  • These digital product references. This depends on the material and conditions.
View full details