HIKOKI MV (36V) brushless wire saw machine CJ36DA (clean machine)

MOP$2,100.00 MOP$1,261.00

Cleaner: In-store cash purchase discounts

In-store cash purchase discounts
Online payment
Add to WishlistCompare

Ask a Question
Vendor: HIKOKI
Description

Features

  1. Applicable materials: wood 135mm, mild steel plate 10mm, stainless steel 3.2mm
  2. Equipped with brushless motor

  3. Model:CJ36DA(NN)

    Specification:

    Wood:135mm

    Low carbon steel plate: 10mm

    Stainless steel material: 3.2mm

    Number of strokes: 800-3,500/min (returns/minute)

    Stroke: 26mm

    Minimum cutting radius: 25mm (without guide plate)

    Inclined cutting angle: left and right 0-45°

    Function:

    Applicable materials: wood 135mm, mild steel plate 10mm, stainless steel 3.2mm

    Equipped with brushless motor.

    Constant speed control to keep the number of strokes constant.

    Tool-free saw blade replacement requires no tools.

    The saw blade can be installed and removed.

ability wood 135mm
Mild steel plate 10mm
Stainless steel material 3.2 mm
Number of trips 800-3,500/minute (return/minute)
stroke amount 26mm
Minimum cutting radius 25mm (without guide plate)
Inclined cutting angle Left and right 0-45°
Body size (length x height x width) 277×206×81mm (including BSL36A18)
weight 2.7kg (including BSL36A18, excluding blade)
Available batteries MV battery (specify remaining indicator) sold separately
battery MV model / purchase separately
Voltage capacity 36V-2.5Ah/18V-5.0Ah
Charging time About 32 minutes (using UC18YSL3)
charger Model name Purchase separately
Standard accessories Single machine*1 suitcase

Note: The manufacturer reserves the right to change parts and accessories specifications, etc. without prior notice

Cutting speed comparison (standard) *2

  • Cutting conditions:
    MDF (T24mm); Blade used: No. 41; Track position: III;

    Speed: Maximum; Thrust: 20N

    Fengye Hardware guarantees the cheapest price based on the principle of small profits but quick turnover. -
    Store verification and test machine, any defects will be replaced.
    * Store delivery, the choice of confidence

    Cutting conditions:
    SPCC (T2mm); Blade used: No. 123X; Track position: I ;

    Speed: 3; Thrust: 20N

High load cutting

    • The off value is about 1/3 * 2 smooth shearing, the off value is low
    • High thrust for cutting under heavy loads

    Cutting conditions:
    SPF (2 x 12); Use Blade: No. 41; Track: Max;

    Speed: maximum; thrust: 30N (excluding own weight)

    In the graph, the vertical axis is the vibration value and the horizontal axis is the thrust. Compared with our AC motor CJ160V, the vibration value of CJ36DA is about 1/3, and the thrust is also close to the high value of 50N
  1. October 2019. At domestic power tool manufacturers in Japan (based on our research)
  2. Our regular products: Comparison with jigsaw machine CJ160V. Values ​​are reference values. Depends on material and conditions.

Automatic mode function to easily match the ink line at the beginning of low-speed cutting

When a load is applied, the stroke number automatically switches from 1400/min (returns/minute) to 3500/min (returns/minute) to maintain the same stroke number as turntable 5.

Starting with low vibration (1,400 min-1), when load is applied after starting cutting, the number of strokes increases and remains at the same full speed as Turntable 5 (3,500 min-1).

Two modes can be selected according to usage

  • Adjust the dial
    model dial Number of strokes (standard)
    Normal mode 1-5 800-3,500/minute (no segments)
    automatic mode A No load: 1400/min (returns/minute)
    Load: 3500/min (returns/minute)

Constant speed control to keep the number of strokes constant

Tool-free saw blade replacement

  • No tools are required to install and feel the saw blade.
    Tool-free blade replacement
Additional Information
Cleaner

In-store cash purchase discounts, Online payment
Reviews