Low vibration

Vibration is reduced through the anti-shock grip and dynamic shock absorbers, giving you a good feeling when using it.

Vibration value comparison (reference) ^* 3-axis composite value (m/s ² )

• Values ​​are reference values ​​and may vary depending on materials and conditions.

Industry's first ^* vertical assist LED function

Perform vertical drilling through the vertical auxiliary LED reminder.

please note

The function of the vertical assist LED shows the horizontal/vertical plane relative to the direction of gravity, rather than perpendicular to the inclined plane. For surfaces that are relatively perpendicular to gravity, such as walls, it will detect a range of 5 degrees above and below the target surface, but will not detect the left and right sides of the target surface. Also, it doesn't light up while drilling (when the switch is pulled). Please use it to check the angle of the tool body before and after drilling.

• As of October 2022. Survey of hammer drills among Japanese domestic power tool manufacturers

Patented automatic stop function

• Equipped with "auto stop function", which is very useful when drilling continuously. It can memorize the drilling time and automatically stop the motor when the memorized time is reached to maintain fixed drilling operations.

  

please note

The auto-stop feature remembers drilling time but does not guarantee drilling depth. Due to differences and changes in working posture, pressure applied to the machine, and work materials,
Drilling depth may not be fixed. Use a depth gauge in conjunction with the drill to reduce variations in drilling depth.

With reaction force control function (RFC)

• When a load is suddenly applied to the front end of the drill bit, the sliding clutch will be activated, or the controller in the tool body will stop the motor to reduce the shaking of the tool body.

please note

Depending on circumstances and conditions during work, the RFC may not be operational. To ensure the stability of the tool body, please hold the tool body firmly.

Easy to install and remove without removing the drill bit

The dust collection system can be installed and removed with the drill bit installed.

Simple operation panel

Easily switch modes with just a tap.

Switching between two stages of rotation number

Switching adopts push-button operation, and the number of turns and blows can be reduced depending on the work content.
Easier to drill holes in fragile materials.

model	low speed	normal
indicator light Lighted state
Number of revolutions	0~700/min	0~950/min
Number of hits	0~3,170/min	0~4,300/min

According to the application situation, 3 modes can be switched

Use the mode selector lever to switch between three modes according to work needs.

	rotate	Drilling holes in metal and wood
	Spin + Hammer	Drilling holes in concrete etc.
	hammering	Chiseling and grooving of concrete, etc.

High brightness LED light

Equipped with high-brightness LED lights, it is easy to see the target area and work smoothly. Release your finger from the switch and the light will turn off automatically after about 10 seconds.

• Irradiation is not possible when using a dust collection system.

Hooks can be installed (optional)

Product code: 379770

A large hook can be connected to make the product more convenient to use.

Adopts a switch that improves dustproof and waterproof performance

The switch housing uses laser for gap-free welding to improve dust resistance and water resistance.

• Values ​​are reference values ​​and may vary depending on materials and conditions.

You can also purchase optional accessories:

• Dust collection system (special for concrete drilling)
  

  

  
  
  

  Dust collection capacity	0.45L
  Maximum stroke	100 mm
  available drill	Drill diameter: 4.3~20mm Effective length: below 100mm
  Dimensions (width x height x depth)	105×243×366mm
  weight	1.0 kg
  Applicable models	DH3628DA, DH1826DA

The products we offer are brand new and come with the following guarantee:
- Maintenance period: Our store guarantees one year
- Warranty coverage: new product defects

Customer Consultation Service Center: The product maintenance period calculation method of the customer service center of this website is based on the date of your purchase invoice in our store.
◆
◆ When the product is repaired for the first time, please present the product purchase invoice from our store to facilitate the repair service.
◆ If the product is not sold by our company, we cannot provide guarantee service.