Description
12V Peak Impact Driver WH12DA
Features
- The total length of the fuselage is 150mm
- Maximum tightening torque 110Nm
| work ability | small screws | 4~8mm |
|---|---|---|
| Ordinary bolts | M5~M12 | |
| High strength bolts | M5~M10 | |
| tip shape | Hexagonal flat width 6.35 mm | |
| Tightening torque |
Maximum 110N・m (1,120kgf・cm) M12 high strength bolt (strength 12.9), use hex socket |
|
| Number of revolutions without load | 0~2,700/min (repeats/min) | |
| Number of hits | 0~3,200/min (repeats/min) | |
| Body size (length × height × center height) | 150×217×29mm (including BSL1225M) | |
| weight | 1.1kg (when installing BSL1225M) | |
| Available batteries | Sliding Li-ion Battery BSL12XX Series | |
| battery | model | BSL1225M |
| Voltage - Capacity | 12V Peak-2.5Ah | |
| charger | model | UC12SL |
| Charging time※1 | About 37 minutes | |
| Standard accessories | Quick charger, spare batteries, carrying case | |
- Charging time may be longer depending on usage environment and battery condition.
- Note: The manufacturer reserves the right to change parts and accessories specifications, etc. without prior notice.
- The hook is an optional item
Brisk flexibility
Workload per charge (standard) *1
-
Tightening screws: about 30 pieces
Condition: Nominal diameter 4.5 x length 90mm
Other functions
- 20 stage clutch
- Lockless chuck
- With LED light
Light and compact, but large capacity (only applicable to BSL1225M, BSL1240M)
Battery power, battery high temperature and battery failure are clear at a glance (only applicable to BSL1225M, BSL1240M)
-
You can use the battery level indicator to check battery level, battery high temperature and battery failure.
| Light on state |  light signal |
 light signal |
 light signal |
 light signal |
 flashing |
|---|---|---|---|---|---|
| Battery power | More than 75% | 50 to less than 75% | 25 to less than 50% | less than 25% | 0% |
| Light on state |  flashing |
 flashing |
|---|---|---|
| battery status | Output stopped due to high temperature* 1 | Output stopped due to fault*2 |
- Remove the battery from the tool body and allow to cool sufficiently.
- The battery may be defective, please consult your dealer.
Additional Information
| style |
Cleaner, Set: battery (BSL1225M (2.5Ah)*2) + charger (UC12SL), Set: battery (BSL1240M (4.0Ah)*2) + charger (UC12SL) |
|---|
HiKOKI 12V Cordless Impact Driver-WH12DA