Japan limited special edition HiKOKI cordless impact driver MV (36V) WH36DD clean machine (available in stock in Hong Kong)
Japan limited special edition HiKOKI cordless impact driver MV (36V) WH36DD clean machine (available in stock in Hong Kong)
Couldn't load pickup availability
Multi-Volt (36V) Cordless Impact Driver WH36DD
(Battery and charger sold separately)
■HiKOKI multi-voltage 36V cordless impact driver WH36DD(NNL) green/body only
*Airframe only.
*Battery, charger, blade and case not included.
Specification
Fastening ability
Ordinary bolts M5 ~ M16
High strength bolts M5 ~ M14
Machine screw 4 ~ 8 mm
Tex screw diameter 3.5 ~ 6 mm coarse thread
22～
125 mm hexagonal shaft width across flats 6.35 mm
Maximum tightening torque 200 N·m (2,040 kgf) ·cm)
Aggressive Green (L)
Rich black (B)
Forest Green (G) coming soon
Scorpion Red (R) coming soon
Spider Yellow(Y) coming soon
A new mode has been added to the app!
-
Equipped with "fine screw mode" to reduce demoulding *
Set to fine screw mode in the app. The striking mechanism is electronically controlled to reduce cam disengagement. Electronic control recreates the movements of a craftsman as he begins to tighten a screw. Ideal for delicate work such as working with thin screws.
- To use the small screw mode, please connect the Bluetooth battery and enable this mode in the app. (Not set at the time of shipment)
-
More advanced LED lights
The number of lights has been increased from 3 to 9, making it brighter without worrying about bit shadows and improving work efficiency. You can use the switch panel at hand to switch the light's illumination between "strong", "medium" and "weak", and you can use the app for more detailed settings.
-
Mode switchable
The operation panel has a backlight. Good visibility even in the dark, and switching modes is easy.
Equipped with automatic deceleration function * (only in reverse bolt single-shot mode)
It automatically stops and changes speed at a set time and rpm to help prevent the nut from falling off. (Only when the switch pull force is maximum)
LED light dimming function
The illumination can be switched to level 3. "Continuous lighting" mode and "Trigger interlock" mode can also be selected.
- Depending on various conditions such as bolt/nut size, sleeve used, tightening conditions, etc., the nut may separate from the threaded portion during operation, causing the nut to fall off unexpectedly.
New 5 colors!
special new design
-
4-layer molding allows for color combinations by adding accent colors. Added Scorpion Red and Spider Yellow.
-
The body is compact with a head length of 111mm. More convenient to use!
Equipped with a small high-output motor. The head length has been reduced by 3mm, further improving maneuverability in tight spaces.
-
Features newly designed elastomer for easy grip.
The storage box is more convenient to use!
When you close the lid of the accessory box, it automatically locks easily. Prevent small items from scattering if you forget to close the latch. In addition, there is a groove on the side for the hand to be pulled out from the side. It has dust-proof and waterproof performance equivalent to IP65, preventing the intrusion of dust and water.
Standard 2-port fast charger
Can also charge 10.8V batteries. The fastest charging speed in the industry * Low noise of about 45dB!
- Until October 2023. Among Domestic Power Tool Manufacturers (Based on Our Research) (Quick Charger)
The fastest tightening speed in the industry *1 *2
Fixing speed: about 5.46 seconds (hardware screw ⌀7.0×120L, Liuan material)
Best torque: 200N・m
- As of January 2024. Among Domestic Power Tool Manufacturers (Based on Our Research) (Cordless Impact Driver)
- Numbers are for reference only. This depends on the material and conditions.
Make everything more your own with a smartphone app
-
By downloading the app to your smartphone and connecting via Bluetooth®, you can freely adjust the playback and rotation speed of the switch.
You can change 5 settings in just 5 steps!
Switching clearance, minimum speed, maximum speed, soft start, low speed range width
You can change all settings at once!
Default mode/classic mode
- Requires Bluetooth battery and download HiKOKI TOOLS app.
Effort per charge (estimate) *
| work details | ah | Effort per charge (estimate) * | |
|---|---|---|---|
| wood screw tightening | ⌀4.3×65L (Liuan material, no guide holes) | 2.5Ah (multiple volts) | About 760 pieces |
| Tighten the hardware screws | ⌀6.0×120L (cedar, no guide holes) | 2.5Ah (multiple volts) | About 160 pieces |
| Machine screw tightening | M8×16L | 2.5Ah (multiple volts) | Approximately 4,200 pieces |
- Numbers are for reference only. This depends on the material and conditions.
Specifications (Specifications)
| ability | Machine screws | 4-8mm | |
|---|---|---|---|
| Ordinary bolts | M5～M16 | ||
| High strength bolts | M5～M14 | ||
| tex screws | ⌀3.5～⌀6 | ||
| Course Topics | 22～125mm | ||
|
Maximum tightening torque (When fully charged at 20°C) (Tightening time 3 seconds) |
M16 high strength bolts (strength grade 10.9) Use socket adapter+inner hex socket |
200N·m (2,040kgf·cm) | |
| Width across sides of hexagonal axis | 6.35 mm | ||
|
No-load speed (When fully charged at 20℃) |
soft mode | 0~900min -1 (times/minute) | |
| power mode | 0～3,400min -1 (times/minute) | ||
|
APP mode (switch sense) (When setting up the app) |
0～(1,900～3,600) minutes -1 (times/minute) | ||
| Thin screw mode (when setting up the app) | 0~420min -1 (times/minute) | ||
| bolt pattern | Single shot/continuous shot | 0～2,900min -1 (times/minute) | |
| text mode | 0～3,700min -1 (times/minute) | ||
|
Number of blows (When fully charged at 20℃) |
soft mode | 0～2,000min -1 (trip/minute) | |
| power mode | 0～4,100min -1 (trip/minute) | ||
|
APP mode (switch sense) (When setting up the app) |
|||
| Thin screw mode (when setting up the app) | |||
| bolt pattern | Continuous shooting/single shooting | ||
| text mode | 0～2,200min -1 (trip/minute) | ||
| Aircraft dimensions (total length × height × center height) |
118 x 243 x 29mm (when BSL36A18BX is installed) Head length: 111mm |
||
| A lot of | 1.6kg (when BSL36A18BX is installed) | ||
| Available battery *1 | Multi-volt battery (including remaining power display) | ||
| battery | Model name | BSL36A18BX (compatible cooling) (Bluetooth® battery) | |
| Voltage-Capacity | 36V-2.5Ah/18V-5.0Ah | ||
| charger | Model name | UC18YDML (including cooling function) | |
| Charging time *2 | About 19 minutes (actual charging) / about 25 minutes (fully charged) | ||
| Standard accessories | Biceps trainer (slim type) (85L)/2 battery covers | ||
- Traditional batteries (BSL3620, BSL3625, BSL3626, BSL3660 and BSL18XX, BSL14XX series) cannot be used.
- Charging time may take longer depending on ambient temperature and battery condition.
