TOUGHBUILT TB-B1S3-M-20 2 wall-mounted tool box matching shelf metal bracket

TOUGHBUILT TB-B1S3-M-20 2-shelf system

Specification

• Product: 2-shelf system
• Model: TB-B1S3-M-20

• Specification

  
  

  • Product: 2-shelf system
  • Model: TB-B1S3-M-20

  
  

  Assembly instructions

  Please read and follow the instructions carefully before assembling and using this product.

  Packaging contents

  

  • Ax×2
  • Diameter×2
  • Width×4
  • C×8

  
  

  Tools required (not included)

  You will need the following assembly tools (not included in the package):

  • Mounting hardware for wall material type
  Warnings and Precautions
  • WARNING: Wear safety goggles and appropriate clothing when assembling and using this product. Avoid distractions and keep pets and children away from work areas.
  • WARNING: The E-rails (D) must be properly secured and capable of supporting a load of 100 lbs. Use mounting hardware appropriate for the type of wall material.
  • Warning: Do not step on the shelf.
  • NOTE: Maximum load per rack is 50 lbs. Distribute the weight evenly and place heavier loads on the bottom rack.
  • Note: Use the locking bolts to stabilize the shelf on the E-shaped track (D).
  • NOTE: Do not alter this product in any way.
  Important! Read all safety warnings and all instructions before use. TOUGHBUILT® INDUSTRIES, INC. is subject to change without notice or obligation and may differ from the content in this manual.

  
  

  Assembly instructions

  Install E-track E-rails (D) must be properly secured and capable of supporting a load of 100 pounds. Wall mounting hardware not included. Use mounting hardware appropriate for the type of wall material. Please consult a professional for assistance if needed. Assembling shelves Please follow the steps below to assemble the shelves:

  1. Place the two A blocks parallel to each other.
  2. Attach the two B pieces to the ends of the A pieces.
  3. Attach the four C pieces to the corners of the A and B pieces.
  Install shelves Please follow the steps below to install the shelves:
  1. Press and hold the D tab on the E rail (D).
  2. Place the assembled shelf on top of the E-track (D) and insert the D tabs into the corresponding slots.
  fixed shelf Please follow the steps below to secure the shelf:
  1. Tighten the bolt until it contacts the E-rail (D). Do not overtighten.
  2. To remove the shelf, loosen the bolts.
  3. Loosen the bolts to remove the shelf.
  2-shelf system | TB-B1S3-M-20