HiKOKI’s new CR36DMA tiger saw – tool only
HiKOKI’s new CR36DMA tiger saw – tool only
Couldn't load pickup availability
HiKOKI new product CR36DMA tiger saw
| Model specifications | battery | charger | Outer box | |
|---|---|---|---|---|
| CR36DMA | (NN) | Shop separately | carton | |
Specification
| ability | pipeline | Mild steel pipe: outer diameter 130mm / PVC pipe: outer diameter 130mm |
|---|---|---|
| wood | 255mm (thickness) | |
| Mild steel plate | 19mm (thickness) | |
| motor | Brushless DC motor | |
| Number of strokes without load | low speed | 0～1,500/min |
| medium speed | 0～2,000/min | |
| high speed | 0～2,500/min | |
| top speed | 0～3,000/min | |
| stroke amount | 29mm | |
| Body size (length x height x width) | 361 x 219 x 87mm (including BSL36A18X) | |
| weight | 2.9kg (including BSL36A18X) | |
| Available battery *1 | MV battery | |
| Standard accessories | Saw blade (No.141(S)), hexagonal wrench | |
- Traditional batteries (BSL3620/3625/3626/3660 and BSL18XX, BSL14XX series) cannot be used.
- Note: The manufacturer reserves the right to change parts and accessories specifications, etc. without prior notice.
Light weight, compact size and excellent maneuverability
This tool is lightweight and small, making it easy to operate even when working in tight or high locations, significantly increasing work range and efficiency.
* Dimensions and weight values are measured with BSL36A18X installed.
Our original "straight rail counterweight" achieves low vibration!
Our original technology "straight rail counterweight" can produce the maximum low vibration effect with a smaller mass. This technology enables the product to be smaller and lighter, while effectively reducing shaking during cutting and reducing user fatigue.
Our original roller support structure
Designing the tip bearing part as a roller reduces wear and heat caused by friction and improves the durability of the bearing.
Rugged aluminum shell construction
Our products are designed with an aluminum shell inside, which can maintain the stability of all transmission components and protect them from accidental drops or impacts.
Part accuracy is still maintained.
Excellent cutting speed and adhesion
In the short design, we achieved ultra-fast cutting speed and adhesion that is not easy to stagnate. Even in strenuous positions, you can complete your work quickly and reduce fatigue.
| Cutting conditions | Cutting speed (reference) * | Workload per charge (approximately) * | ||
|---|---|---|---|---|
| wood | Cutting material: SPF2×10 material (thickness 38×length 235mm) Saw blade: No.132 |
About 6.9 seconds (Thrust: 49 (5kgf)) |
About 60 times (2.5Ah/speed mode: highest speed) |
|
| Steel Pipe | Cutting material: SGP40A (outer diameter 50mm x thickness 3.5mm) Saw blade: No.103 |
About 20.1 seconds (Thrust: 49 (5kgf)) |
About 35 times (2.5Ah/speed mode: medium speed) |
|
- The above data is for reference only, actual values may vary depending on materials and conditions.
Equipped with high-brightness LED lights
Equipped with an LED light, it is also suitable for working in narrow spaces such as under beds or in dim environments. At the same time, the shape of the base has been improved, and the irradiation range is wider than previous products.
4 speed modes
You can easily select the maximum number of strokes through the speed switch at hand according to the work content.
| speed mode | low speed | medium speed | high speed | top speed |
|---|---|---|---|---|
| switch panel display | 
|
|||
| Number of trips | 0~1,500/min | 0~2,000 /min | 0~2,500 /min | 0~3,000 /min |
| Applicable materials |  |
|||
- The number of strokes may differ from the above depending on operating conditions, etc.
High power even when cutting upside down
Even when working in tight or high places, inverted cutting maintains the same power and speed as conventional cutting, helping to improve work efficiency.
Tool-free saw blade changing mechanism
Through the lever operation on the saw blade holder, you can easily install and remove the saw blade, eliminating tedious steps.
Adjustable base position
The base position can be adjusted using the included hex wrench. Adjusting according to the work content will help the long-term use of the saw blade.
