HiKOKI高壹DH18DPA 18V 無刷鎚鑽無碳刷套裝新款 HIKOKI

HiKOKI DH18DPA 18V brushless hammer drill without carbon brush set new model

MOP$1,870.00

style: HIKOKI 18V rechargeable brushless hammer drill SDS Plus single battery 5.0AH+1 charge

HIKOKI 18V rechargeable brushless hammer drill SDS Plus single battery 5.0AH+1 charge
Add to WishlistCompare

Ask a Question
Vendor: HIKOKI
Tags: HIKOKI
Description
ability cement 18mm
ironwork 13mm
carpentry 18mm
Number of revolutions without load
(When the temperature is 20°C and fully charged) 		NORMAL mode 0~1,080/min (repeats/minute)
LOW mode 0-800/min (returns/minute)
Number of hits without load
(When the temperature is 20°C and fully charged) 		NORMAL mode 0-5,500/min (times/minute)
LOW mode 0-4,100/min (times/minute)
Body size (length x height x width) 271 x 211 x 81mm (battery installed)
Weight (battery installed) 2.5kg (including side handle)
2.3kg (excluding side handles)
battery Model Name BSL36A18
Voltage capacity 18V-5.0Ah
Charging time about 75 minutes
charger Model Name UC18YFSL
Standard accessories 5.0AH battery (BSL36A18*1), charger (UC18YFSL), depth gauge, side handle, battery cover

Note: The manufacturer reserves the right to change parts and accessories specifications without notice.

The best balance of compactness and lightness

  • Compact and lightweight body, the center of gravity is close to your hand, making it easy to hold and work.

    ※ The weight shown in the picture is with BSL36A18 lithium battery, without side handles

    The distance from the hand to the tip is 231 mm, the distance from the hand to the center of gravity is 81 mm, and the mass is 2.3 kg.

Top *1 drilling speed

  • Commonly used for drilling small diameter holes quickly.

    Comparison of drilling speed *2 (average drill diameter is 3.5 to 10 mm)
    (Compare with our traditional product DH18DSL)

    1. As of October 2020. At Japanese domestic power tool manufacturers (based on our research) (13-18mm grade/2 mode/18V cordless hammer drill)
    2. Values ​​are guide values ​​(depending on material and conditions)
    The DH18DPA drills approximately 23% faster than our regular product, the DH18DSL.

Low vibration

  • Anti-shock rubber absorbs shock and vibration transmitted to the handle.

    Image of shockproof rubber

    Low vibration comparison (reference) *
    3-axis resultant value (m/s 2 )

    The 3-axis combined value of DH18DPA is 9.9m/s2, which is about 18% lower than the 12.1m/s2 of the traditional product DH18DSL.
    • Values ​​are guide values ​​(depending on material and conditions)

High luminosity and brightness equipped with LED lights

  • It is easy to see the target position and work smoothly.

    LED light image

Switching according to the work content Equipped with 2-stage speed switching

  • Drilling holes in brittle materials becomes easy by pressing the switch and reducing the number of revolutions and strikes.

    Illustration of transfer switch and indicator light

Supports stable drilling and improves efficiency of continuous work Equipped with automatic stop function

  • Equipped with "auto stop function", it is very convenient when performing continuous drilling. Store drilling time and automatically stop the motor at the stored time.

    For example, if it takes 10 seconds from power on to power off, those 10 seconds will be stored and the next drill will automatically stop within 10 seconds.
Please note
It records drilling time but does not guarantee drilling depth. Due to differences and changes in posture during work, pressing force on the machine, and work materials, the drilling depth may not be constant. To reduce differences in drilling depth, use depth gauges together.

Reaction Force Control (RFC) for sudden loads

  • If the drill bit suddenly encounters excessive load, the slip clutch will act.
    Alternatively, a controller built into the tool body can stop the motor, thereby reducing tool body vibration.

    RFC explanation diagram
    Please note
    Depending on the operating conditions, it may not work or its performance may not be fully realized. When working, use caution when installing and securing materials and holding the body of the tool firmly.

Amount of work required for one full charge (estimated) *

Work content capacitance Amount of work required for one full charge (estimated) *
drilled concrete Depth 30mm,
Drill diameter 3.5mm 		5.0Ah (MV battery) About 305
Depth 30mm,
Drill diameter 10.5mm 		5.0Ah (MV battery) about 130
  • These numbers are for reference only. This depends on the material and conditions.
Additional Information
style

HIKOKI 18V rechargeable brushless hammer drill SDS Plus single battery 5.0AH+1 charge
Reviews